DCU9902
|
|
DCU9904
|
| |
|
|
DCU9901:
 1
Door Relay (NC/NO)
1
Door Sensor (NO)
1 Exit Button input
1 Extension Relays
2 Extension Inputs
2 Weigand Readers
DCU9902:
2 Door Relays (NC/NO)
2 Door Sensors (NO)
2 Exit Buttons
2 Extension Relays
4 Extension Inputs
2 Weigand Readers
DCU9904:
4 Door Relays (NC/NO)
4 Door Sensors (NO)
4 Exit Buttons
4 Weigand Readers
DCU9902XP:
2 Door Relays (NC/NO)
2 Door Sensors (NO)
2 Exit Buttons
2 Extension Relays
4 Extension Inputs
2 Weigand Readers
DCU9904XP:
4 Door Relays (NC/NO)
4 Door Sensors (NO)
4 Exit Buttons
4 Extension Relays
4 Weigand Readers
|
|
DCU9901/2/4: .
Works with RS485 Hands to Hands Bus .
Able to connect to PC directly using crossover cable.
Support RS232/RS485 interface.
Support online computer polling.
Support Time Zone, Time Table, Security Group, Holiday.
Support Flow Control, MultipleCards Authentication, Anti Pass Back.
1-4 doors, 2-4
Weigand readers according to XX.
1-2
Extension Relays built-in, according to XX.
2-4
Extension Inputs built-in according to XX.
Cards
Holder capacity: 7,500
Transaction storage: 4,095
Communication speed: 9600
Power:15VDC (±10%) or 12AC (50/60HZ).
DCU9902XP/4XP:
Support online computer polling
Supports RS485 interface.
Support Time Zone, Time Table, Security Group, Holiday.
Support Flow Control, MultipleCards Authentication, Anti Pass Back.
2-4 doors, 2-4
Weigand readers according to XX
2-4
Extension Relays built-in, according to XX
4
Extension Inputs built-in according to XY
Cards
Holder capacity: 7,500
Transaction storage: 4,095
Communication speed: 9600
Power:15VDC (±10%) or 12AC (50/60HZ).
Design By Xinlix CPLD LSI . |
| |
DCU9901
|
| |
|
|
DCU9902XP |
|
DCU9904XP
|
DCU99XP series controllers are new design and state-of-the-art 4 doors access controller by Elanst elctronicl comany Limited. It is a perfect low cost solution for today Intelligent Building.
DCU99XX series controllers are developed as a compact, easy-to-use access controller, to be installed at sensitive locations for granting access to secure areas. The DCU99XX works with various unit settings, according to the security level required at the location of the unit. This elegant device, made of strong metal housing, can be installed just about anywhere, as a stand-alone,
contact less terminal. The sealed enclosure makes the DCU99XX ideal for harsh and exposed environments that can easily damage standard unprotected terminals. All the relays and I/O com inside DCU99XX have the protection circuit, to assure stability.
Access Control made easy
Access Control System is used to control and record employee entry/exit in or out of restricted areas. The recorded data may be automatically fed into an access control program, security program, statistical analysis or any other application.
Communication mode
RS485bus, the data transmitting range is over 1200 meters. The speed is 9600 1,1,n.
Through a RS485 bus, the user can connect 127 sets of DCU99XX controllers at the most. Then they can control 508 doors at that time. Each of them can work separately. When offline, it can record the data and transactions automatically. When online again, it can upload these information to sever PC automatically.
The required telecommunication cable is the two-core shielding line, wire resistance is 24/1000 ft max. Recommended cable is Belden 9501, Alpha 5471C or equivalent.
|
Standard Features:
Supports RS485/RS232 interface. 