 System Features:
 Read
any EM compatible proximity card
Output Wiegand 26/34 bit format
Water
proof design
Compact design
Technical
parameters:
 Card Format: EM4001 or compatible
Frequency: 125KHz
Output: Wiegand 26/34 bits
DC
Power: 8 - 15VDC
Static Current: 50mA, Operating Current: 60mA.
Operating temperature: -25 ~ 70 Degrees
Hole diameter: 75mm
Reader range: 50-90cm
Humidity: 10%~90%
Dimensions: 230x230x35 mm
Connection
Pin Assignment
1 |
Black |
Ground (GND) |
2 |
Orange |
W26/34 Selected (W26/ABA) |
3 |
Blue |
Green LED |
4 |
Yellow |
BUZZER
(buzzer control) |
5 |
Green |
Data0 (Data) |
6 |
White |
Data1 (CLK) |
7 |
Brown |
Hold(CP) |
8 |
Red |
Power supply (VCC): 8 -15VDC |
Note:
The
connection between reader and controller should use the 8
cores STP. The diameter should over 24AWG(0.206mm²), the
distance should be less than 100M.
To performance in long distance, the data0 and data1 should be twisted, shielded.
Do not
use the same source of power supply for the electrical door
lock and readers to avoid electrical sparkle interference. |
Return to top