System Features

	Support Mifare or ISO14443 Type A card
	Operating: Mifare Card Serial Number
	Weigand 24/34 interface
	Water proof design
	compact design

Technical Specifications

	Card Format: Mifare S50 1KB or compatible
	Dimension: 54x128x17mm
	Hole diameter: 75mm
	DC Power: 7 - 15VDC
	Static Current: 50mA, Operating Current: 60mA.
	Temperature: - 25 ~ 70 Degrees
	Humidity: 10% ~ 90%
	Reader range: 4-7cm
	Weight: 200g
	Output: Wiegand 26/34 bits
	Hole diameter: 75mm

Connection Pin Assignment

1.、+12V DC Powerr
2、DATA"0 "
3、DATA"1 "
4、Green Led
5、RS485A
6、RS485B
7、Gnd

Note:
The connection between reader and controller should use the 8 cores STP. The diameter should over 24AWG(0.206mm²), the distance should be less than 100M.
To transmit the data successfully, the data0 and data1 should use the wire in the same pair. E.g. Green, Green/white.
When the transmitting distance is over 60M, we should combine the wires to connect Data0 and Data1, this is for reduce the resistance.
Do not use the same source of power supply for the electrical door lock and readers to avoid electrical sparkle interference.

Installation for Surface mounting

Drill into the wall for 2 holes (diameter=6mm, depth=32mm), and drill for another hole of 1/2 inch.
Drill the reader's wire through the hole, and use screw (6*22mm) to peg the reader base.
Cover the reader module on to reader base. When you hear "Ka", it's OK.